Dahdi_monitor manual

 · The dahdi_monitor utility can be used to take recordings at the driver level of DAHDI channels, and to visually monitor volume levels on a channel. Note: When using dahdi_monitor, the first parameter is always the channel number, as seen by DAHDI, you will need to check the DAHDI configuration file in order to find out the channel number of the .  · DAHDI is a collection of open source drivers, for linux, that are used to interface with a variety of telephony related hardware. It consists of two parts. The DAHDI-Linux project contains the individual board drivers for the supported hardware. The DAHDI-Tools project contains an assortment of user space utilities that are used to setup and. The first (mandatory) parameter is the number of the channel to monitor. -m Multiple channels. Don't multiplex both Rx and Tx in a single channel. Normally there's a different option that you need that implies it. -o Plays the output to OSS (/dev/dsp). Requires -m not to be used. -v Display Visual audio levels. With two v-s, Verbose mode is enabled, that shows the actual levels as .

NAME dahdi_monitor - checks the rx/tx levels of DAHDI channels. SYNOPSIS dahdi_monitor channel number [-v] [-f FILE]. DESCRIPTION dahdi_monitor monitors a DAHDI channel. It gives you a visual represen-tation of the sound strengths and makes it easy to see if the received or transmitted signals are too high or out of balance. dahdi_monitor monitors a Dahdi channel. It can record the output to a file, play it to the speaker, or visualize the audio levels on the terminal. Recorded audio files are by default raw signed linear PCM. dahdi_cfg dahdi_genconf dahdi_hardware dahdi_monitor dahdi_registration dahdi_scan dahdi_test dahdi_tool darkstat db2bak www.doorway.ru db2index www.doorway.ru db2ldif www.doorway.ru dbadm_selinux dbadm_sudo_selinux dbcheck www.doorway.ru dbskkd_selinux dbverify dcbtool dcc_client_selinux dcc_dbclean_selinux dccd_selinux dccifd_selinux dccm_selinux dcc_selinux.

User's Manual of PLANET Internet Telephony PBX System Channel Monitor is technically a DAHDI Monitor that allows you to monitor signal level on. dahdi_tool(8), dahdi_monitor(8), asterisk(8). Author. This manual page was written by Santiago Ruano Rincón for the Debian system. dahdi_cfg dahdi_hardware dahdi_monitor dahdi_scan dahdi_test your manual changes will be LOST. # Dahdi Configuration File.